Catalog Explorer User Manual
______________________________________________________________________________
________________________________________________________________________________
Page 17 of 36
Visit our knowledgebase at:
http://www.ricoh-usa.com/support/knowledgebase.asp
Copyright 2008 Ricoh Americas Corporation
8.2.1 Specify physical area
Search for the part by specifying a physical area within the unit/section using the mouse.
In the “Search Method” section of the GUI, select the Specify Physical Area radio button.
Use the mouse to define a box around a specific area inside the unit displayed.
To define the box, hold the left button down while you drag the mouse.
Result: All registered parts used within the defined area are then displayed in the
individual parts list.
Note:
If there seems to be a part missing from the list after you define the box, try increasing the
size of the area.
This search method cannot be used if “Entire machine” has already been selected as the
unit/section.
When viewing a unit for which there is an internal view available, this will be noted at the
top right-hand corner of the main image area. For more details on using the internal view
to search for individual parts, see section 9.1.
