Ricoh BY5020, Руководство по обслуживанию на месте

Страница: 37 / 38

2.Detailed Descriptions
33
Paper Size Detection
The side fences [1] can be adjusted to standard and non-standard paper sizes.
Paper size is measured with the paper width switch [3] and the paper length sensor [4].
When the side fences are moved to match the paper width, five feelers inside the paper width switch [3]
slide along the wiring patterns on the paper width switch terminal plate. The status of each feeler is
read to determine whether it is High (in contact with a pattern wire) or Low (not in contact with a wire).
The paper length sensor reading (ON or OFF) is used with the paper width reading to determine the
paper size. For more details about how the paper size is determined, see the paper size detection table
on the next page.
The paper end sensor [2] de-activates when the last sheet is fed, reports that the paper tray is empty,
and halts the job.
Paper Size Detection Table
Paper Size Paper Width Switch Length Sensor Area
1 2 3 4 5 NA EU
Large 12" × 18" H H H H L L
320 × 450 mm
A3 SEF 297 × 420 mm H H H L L L
A4 LEF 297 × 210 mm H