Ricoh BY5020, Руководство по обслуживанию на месте

Страница: 11 / 38

1.Replacement and Adjustment
7
2.
Disconnect the ground wire and open the clamps .
3.
Disconnect the harnesses.
4.
At the front, disconnect hinge plate [1] and swing the hinge plate to the right ( x1).
5.
At the rear, disconnect hinge plate [2] ( x1).
6.
Carefully disconnect the hinge and spring [3].
7.
Pull the harnesses through the frame [1].
8.
Remove the feed tray [2].
9.
Turn over the feed tray. There are three sensors on the bottom of the feed tray.
Paper end sensor
Paper width sensor
Paper length sensor