Ricoh BOOKLET MAKER BK5010, Руководство по установке

Страница: 56 / 74

1-52
04 October 2007 TRIMMER INSTALLATION
1.5.6 CHECK THE INSTALLATION
1. If installing a Book Folder BF5010, continue to section ( 1.6 ) otherwise
continue with step 2.
2. Power on the Booklet maker.
NOTE: Make sure that the finisher connector is connected to the copier.
[A]
3. In the Trimmer, check the Index 16 value [A].
4. Press the Tools button.
5. Scroll down to Service and press the OK button.
6. Key in the Password.
7. Scroll down to EEPROM Values and press the OK button.
8. Scroll to INDEX 16, TR5010.Knife Zero, and press the CHG button.
9. Key in the value you have in the trimmer.
10. Go down to Store and press the OK button.
11. Perform a Detailed self-diagnostic, according to section (
5.3.3 ).
12. Restart the system.
13. Power on the Copier.
NOTE: Make sure that the Booklet maker is powered ON before the Copier.
14. Set up the Booklet maker to Auto paper size.
15. Check that the Booklet maker is set to Staple ON.
16. Set up the Trimmer to Trimmer ON.
Trimmer interior towards Booklet Maker