Ricoh Bc-C1, Руководство по обслуживанию на месте, Страница: 161 / 268

1996 [Heater Forced Off]
Specifies the time for turning off the heating lamp forcibly when the paper type is
changed during the printing.
1-996-005 After Printing *ENG [0 to 120 / 7 / 1 sec / step]
SP2-XXX (Drum)
2001 [Charge Roller Bia]
-
2-001-001 Printing *ENG [-2100 to -1300 / -1450 / 10 vol / step]
Adjusts the voltage applied to the charge roller when printing. The actually applied
voltage changes automatically as charge roller voltage correction is carried out. The
value you set here becomes the base value on which this correction is carried out.
2102 [Main Scn Mag. Adj]
Adjust the image scale for main scan magnification.
• A "+" setting stretches the image.
• A “-” setting compresses the image.
2-102-001 - *ENG [-0.5 to 0.5 / 0.0 / 0.1% / step]
2105 [LD Power Adjust]
2-105-001 Unit *ENG [-50 to 50/ 0 / 0.1% / step]
Adjusts the standard power of the LD unit
for the image arear.
2-105-002 Unit *ENG [-50 to 50/ 0 / 0.1% / step]
Adjusts the standard power of the LD unit
for discharging.
2201 [Deve Bias Adjust]
Engine SP Mode
159