SERVICE CALL CONDITIONS
SM
4-49
B234/B235/B236/D101/D102/D103
T
ro
u
b
le
-
s
h
o
o
ti
n
g
Pre-bind jogger clamp HP error
792-9
D
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
•
Spine clamp motor (M605) connector
loose, broken, defective
•
Motor defective
•
Motor overload
•
Clamp HP sensor (S603) connector
loose, broken, defective
•
Sensor defective
Binder unit runout error
792-10
D
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
•
Runout press roller motor (M610)
connector loose, broken, defective
•
Motor defective
•
Motor overload
•
Runout roller HP sensor (S614)
connector loose, broken, defective
•
Sensor defective
Clamp thickness error
792-11
D
50-sheet detection sensor (S606) went OFF
during pre-bind jogging when a 100-sheet
thickness was detected. (1st detection jam,
2nd detection SC error)
-or-
50-sheet detection sensor went OFF at
initialization when the clamp moved to the
open position.
•
50-sheet detection sensor
(S606) connector loose,
broken, defective
•
Sensor defective
Alignment pin error
792-12
D
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
•
Alignment pin motor (M602)
connector loose, broken, defective
•
Motor overload
•
Motor defective
•
Alignment pin HP sensor (S604)
connector loose, broken, defective
•
Sensor defective
