Ricoh AP-C3, Руководство по обслуживанию на месте, Страница: 600 / 1334

002
IP Address (Primary)
Range: 000.000.000.000 to
255.255.255.255
Use this SP to set the Scan Router Server address. The IP address under the transfer tab
can be referenced by the initial system setting.
006
Delivery Error Display Time [0 to 999 / 300 / 1 second /step]
Use this setting to determine the length of time the prompt message is displayed when a
test error occurs during document transfer with the NetFile application and an external
device.
008
IP Address (Secondary)
Range: 000.000.000.000 to
255.255.255.255
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
009
Delivery Server Model [0 to 4/ 0 / 1 /step]
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
010
Delivery Svr. Capability [0 to 255 / - / 1 /step]
Bit7 = 1 Comment information exits
Changes the capability of
the registered that the
I/O device registered.
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set
to “0”)
5. System Maintenance
598