manualshive.com logo in svg

Ricoh AP-C3, Руководство по обслуживанию на месте, Страница: 140 / 1334

Поделиться
Скачать
Ricoh AP-C3 Скачать руководство пользователя страница 140

SD Card Appli Move

Overview

The service program "SD Card Appli Move" (SP5-873) lets you move application programs from one
SD card to another SD card.
If more than one application is required, the applications must be moved to one SD card with SP5873-1
(PostScript 3, Security Application, PictBridge, IPDS unit, etc.).
Be very careful when you do the SD Card Appli Move procedure:

• The data necessary for authentication is transferred with the application program from an SD card

to another SD card. Authentication fails if you try to use the SD card after you move the application
program from one card to another card.

• Do not use the SD card if it has been used before for other purposes. Normal operation is not

guaranteed when such an SD card is used.

• Remove the cover [A] (  x 2), and then keep the SD card in the place [B] after you move the

application program from one card to another card. This is done for the following reasons:

• The SD card can be the only proof that the user is licensed to use the application program.
• You may need to check the SD card and its data to solve a problem in the future.

Move Exec

The menu "Move Exec" (SP5-873-001) lets you move application programs from the original SD card
to another SD card.

2. Installation

138

Содержание AP-C3























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов