Ricoh Aficio SP C210, Руководство по установке, Страница: 50 / 54

2-34
11.2 Adjusting Paper Feeder
11.2.1 Adjusting Left and Right Margins
If the test printout is biased horizontally, adjust the left and right margins using the utility function of the
control panel.
Procedure for adjusting the left and right margins
(a) Perform test print. (See Operating Instructions attached to the CD-ROM.)
If you intend to adjust the paper tray of the Paper Feeder (tray2), perform test print in
simplex print mode on plain paper fed from tray2.
(b) Measure left margin A (mm) and right margin B (mm) on the printed test pattern.
(c) Determine the setting according to the table below.
B-A (mm) -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 +0.5 +1 +1.5 +2 +2.5 +3 +3.5
Setting -35 -30 -25 -20 -15 -10 -5 0 +5 +10 +15 +20 +25 +30 +35
(d) Ensure that “Ready” is displayed on the LCD.
Tray1: A4
Ready
(e) Press ONLINE key. The ONLINE lamp goes out when
the printer enters offline mode.
Tray1: A4
Not Ready
(f) Press MENU key. Keep pressing MENU key for three
seconds. Utility Menu appears after Test menu appeared.
Tray1: A4
Utility Menu
(g) Press ENTER key. Clear Belt CG submenu appears. Utility Menu
Clear Belt CG
(h) Press
!
or
"
key the proper number of times to select the menu item as follows.
h
When adjusting the left and right margins for tray2:
Utility Menu
Tray2 Margin
The subsequent explanation assumes adjustment for tray 2.
Printed
image
F
or
m
fe
ed di
re
ct
ion
A B