Ricoh Aficio SP C210, Руководство по установке, Страница: 21 / 54

2-5
3. Checking Where to Install the Printer
Before installing the printer, check the environment and space for the installation.
3.1 For Proper Operation
! Supplies and parts, including toner, and belt cartridge have been evaluated for quality based
on a benchmark for recommended products. Use recommended supplies and parts to
maintain this standard and achieve high quality results.
! Place this printer on a level, stable table that is not curved. Do not place across two tables.
The machine must be level within 4.5 (mm)/0.2 (inch) front to rear, and left to right.
! Recommended temperature and humidity.
! To load paper, replace consumables, and resolve paper jams, etc., leave a clearance as
shown below.
A: more than 25 cm (10 inches)
B: more than 20 cm (8 inches)
C: more than 70 cm (28 inches)
D: more than 50 cm (20 inches)
! When moving from a cold to warm location, or if the local temperature rises suddenly,
condensation may occur inside. If this occurs, leave the machine unused for at least one
hour to let it acclimatize.
! Extreme temperature rise inside the machine may cause malfunctions. Do not place
anything in the immediate area of the exhaust and intake vents.
! Always keep all covers closed.
! During printing, do not open the cover of any parts, and do not move the printer.
! Do not pull out the paper tray during printing. Printing will stop and paper will jam.
! Prevent foreign objects, such as paper clips, etc., from falling inside the printer.