Ricoh Aficio MP W2400, Руководство по эксплуатации

Страница: 28 / 54

Functions of the Folding Finisher
20
2
Adjusting folding width
This section explains how to adjust folding widths, using the example of fan-folding
paper three times to make four surfaces.
If you adjust the folding width
n
1 mm, the size of each surface is adjusted as
follows:
The last surface will be shorter than the other surfaces, since the length of the
other surfaces has increased.
Note
❒
Folding position adjustment is applied to all fold types and surfaces. However,
a folding width cannot be set to less than 140 mm (5.6 inches), since the mini-
mum folding width for Fan fold is 140 mm (5.6 inches).
❒
For the procedure to configure settings using the Folding Finisher, see
“Changing the Folding Finisher Settings”.
❒
When configuring settings using the printer, use the system setting “Fold Width
Fine Adjustment”. For the procedure to configure settings using the printer, see
General Settings Guide manual of the printer's operating instructions.
Reference
p.37 “Changing the Folding Finisher Settings”
Before adjustment After adjustment
1st surface A mm A n 1 mm
2nd surface B mm B
n
1 mm
3rd surface C mm C
n
1 mm
4th surface D mm D o 3 mm
ATR015S