Ricoh Aficio MP W2400, Руководство по эксплуатации

Страница: 20 / 54

Preparation Before Using the Folding Finisher
12
1
Paper
This section lists the paper types and sizes that are supported by the Folding Finisher,
and paper types that are not supported.
Supported Paper Types and Sizes
The following tables show supported types and sizes of paper for each fold type.
Fan fold
Note
❒
Do not fold Translucent Paper or OHP transparencies. Doing so may cause
malfunctions.
❒
Paper is output from the Paper Exit. The exit tray can hold only one sheet of paper
at a time. When paper is output, retrieve the paper immediately. Operating the
machine without retrieving the paper results in paper jam.
❒
When paper is wrinkled, turn the Drying Heater switch to “ a ON”.
Non-fold
Note
❒
Paper is usually output from the Non-folded Paper Exit. However, paper that
is 200 to 320 mm (7.9 to 12.6 inches) in length is output from the Paper Exit.
Up to 10 sheets of paper can be stacked in the Non-Folded Paper Exit Tray
(when using A1 paper).
Paper type Paper size Paper weight
Plain Paper, Recycled
Paper • Width
All paper sizes supported by the printer.
• Length
Online mode: 320 to 6000 mm (12.6 to 236.3 inches)
Offline mode: 297 to 6000 mm (11.7 to 236.3 inches)
Regardless of the length of the paper, the
number of folded surfaces cannot exceed 30
(i.e., 29 folds) .
64.0 to 81.4 g/m
2
(17.1 to 21.7 lb)
Paper type Paper size Paper weight
All paper types sup-
ported by the printer.
All paper sizes supported by the printer.
64.0 to 81.4 g/m
2
(17.1 to 21.7 lb)