Ricoh Aficio MP 1600L, Руководство по эксплуатации

Страница: 45 / 156

Using as a NetWare Print Server/Remote Printer
37
1
Form Feed
Do not use NetWare to configure form feed. Form feed is controlled by the print-
er driver on Windows. If NetWare form feed is configured, the printer may not
print properly.
Follow the procedure below to disable form feed according to the operating sys-
tem used:
• Under Windows 95/98/Me, clear the
[ Form feed ]
check box on the
[ Printer Set-
tings ] tab in the printer properties dialog box.
• Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear
the [ Form feed ] check box on the [ NetWare Settings ] tab in the printer properties
dialog box.
Banner Page
Do not use NetWare to configure a banner page.
Follow the procedure below to disable banner pages according to the operating
system used:
• Under Windows 95/98/Me, clear the
[ Enable banner ] check box on the [ Printer
Settings ]
tab in the printer properties dialog box.
• Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear
the
[ Enable banner ]
check box on the
[ NetWare Settings ]
tab in the printer prop-
erties dialog box.
Printing after Resetting the Printer
To print the server connection requires 30 - 40 seconds to resume after the printer
is reset. During this period, jobs may be accepted (depending on NetWare spec-
ifications) but not printed.
To print after resetting the printer as the remote printer, check on the print server
that the remote printer is disconnected, or wait for two minutes before trying to
print.