Ricoh Aficio DSm616 Скачать руководство пользователя страница 50

Страница: 50 / 80

Troubleshooting

❖

Duplex (Type 3 only)

When Memory Is Full

Problem

Causes

Solutions

Order of copies is not cor-
rect.

You set originals in the in-
correct order.

When setting a stack of originals in
the ADF or ARDF, the last page
should be on the bottom.

If you set an original on the expo-
sure glass, start with the first page
to be copied.

In Duplex Margin mode,
parts of the original image
are not copied.

The margin is too wide.

Set a narrower margin with the user
tools. See “Duplex Margin” in p.55
“Duplex Margin”.

When using Duplex, copy
is made Top to Top even
though Top to Bottom is se-
lected.

You placed the originals in
the wrong orientation.

Place the originals in the correct ori-
entation. See p.18 “Original Orien-
tation” .

Messages

Causes

Solutions

Memory is full. [Print] scanned
orig., [Clear] to cancel/clear

memory.

[

Clear

][

Print

]

Note

❒

Copying will stop and this message will be
displayed when the memory is full.

The scanned original
exceeds the number
of pages that can be
stored in memory.

Press

[

Print

]

to copy

scanned originals
and cancel the scan-
ning data. Press

[

Clear

]

to cancel the

scanning data and
not copy.

Reset * orig., then press
[Resume] to scan and copy the re-
maining originals.

[

Stop

]

[

Resume

]

The machine checks
if the remaining orig-
inals should be cop-
ied, after the scanned
original has been
printed.

To continue copying,
remove all copies,
and then press

[

Resume

]

. To stop

copying, press

[

Stop

]

KirC2_GBcopyF_FM.book Page 42 Friday, April 15, 2005 2:55 PM

Содержание Aficio DSm616

















































































Результаты поиска

Содержание Aficio DSm616

Отзывы:

Ricoh Aficio DSm616, Руководство по эксплуатации, Страница: 50 / 80

Результаты поиска

Содержание Aficio DSm616

Отзывы: