Ricoh Aficio Color 4006 Скачать руководство пользователя страница 172 | Manualshive

Страница: 172 / 228

Ricoh Aficio Color 4006 Скачать руководство пользователя страница 172

159

Changing the Machine’

s

Settings

User Tools

Menu

Copy Reset Timer

Maximum Copy Quantity

Tone: Original on Platen

Front Side Margin Adjust.

Back Side Margin Adjust.

1

→

2 Duplex Auto Margin

Adjust.

Magnification Setting

Initial Mode Setting

Description

The machine returns to its initial condition automatically after your job is finished. The
time can be set from 10 to 990 seconds, or no copy reset.

1. Select [On] or [Off] keys.
2. When you select [On], enter the time with the Number keys. Then, press the [#]

key.

Note

❐

Default: on (60 seconds)

The maximum copy quantity can be set from 1 to 99.

Note

❐

Default: Off

The key tone sounds when you forgot to remove originals after copying.

Note

❐

Default: Off

❐

When the “Panel Tone” is set to Off, the beeper does not sound even if the “Original
Tone” is set to On.

You can adjust the front side margin direction and width that is selected as a default in
Front Side Margin Adjust. Mode. You can change this setting.
• Metric version: left/20 mm - right/20 mm in 1 mm steps.
• Inch version: left/0.8” - right/0.8” in 0.1” steps.

Note

❐

Default:

• Metric version: left/right 0mm
• Inch version: left/right 0"

You can adjust the back side margin direction and width that is selected as a default in
Back Side Margin Adjust. You can change this setting.
• Metric version: left/20 mm - right/20 mm in 1 mm steps.
• Inch version: left/0.8” - right/0.8” in 0.1” steps.

Note

❐

Default:

• Metric version: left/right 0mm
• Inch version: left/right 0"

When you use 1 - Sided

→

2 - Sided mode, the machine set the back side margin

automatically.

Note

❐

Default: Off

Up to 2 reproduction ratios which you frequently use can be registered.
1. Press the [Setting] key.
2. Select the [User Ratio 1] or [User Ratio 2] key.
3. Enter your desired ratio with the Number keys.

Then press the [#] key.

4. Press the [OK] key.

You can set the machine to recall program setting when the machine is turned on or
when modes are cleared.

Note

❐

Default: Normal

«
...
170
171
172
173
174
...
»

Содержание Aficio Color 4006





































































































































































































































Отзывы:

Нет отзывов