Ricoh Aficio Color 4006 Скачать руководство пользователя страница 148

Страница: 148 / 228

135

What to do if Something

Goes W

rong

If You cannot Make Copies as You Want

Action

Adjust the Color Balance.

☛

see page 92.

Perform the Auto Color Calibration.

☛

see page 162.

Perform Auto Color Calibration.

☛

see page 162.

If you cannot correct the problem by
performing Auto Color Calibration,
contact your service representative.

Adjust the Auto Text/Photo Sensitivity
to a “Text” level.

☛

see page 96.

Adjust the Auto Text/Photo Sensitivity
to a “Photo” level.

☛

see page 96.

Adjust the A.C.S. Sensitivity to a “Full
Color” level.

☛

see page 96.

Select Black & White Copy mode.

☛

see page 38.

Adjust the A.C.S. Sensitivity to a
“B&W” level.

☛

see page 96.

Adjust the image density.

☛

see page 37.

Set the right kind of paper in the pa-
per tray.

Note

❐

Copies might be blurred if you copy
onto rough grain, coated, or damp
paper.

Add toner.

☛

see page 138.

Set the narrow margin with the user
tools.

☛

see page 159.

Cause

The color balance is not set properly.

Unsuitable color setting.

An original has screen letters or low
density letters.

An original has a high contrast photo.

An original has a photo having se-
quence thin lines with regular thin
spaces.

There are small or thin color parts.

The machine might detect some black
and white screen images (such as
from newspaper) as a full color origi-
nal.

The image density is too light.

An improper kind of paper is set.

Toner is running out.

The margin is set too wide.

Problem

Color tone of copies is different from
that of originals.

Color tone of copies is completely dif-
ferent from that of originals.

Letter parts and photo parts of an origi-
nal are not separated correctly.

Color parts of an original are copied
in black in Auto Color Select mode.

Non-color parts of an original are cop-
ied in color in Auto Color Select mode.

A copy image is blurred.

In Margin Adjustment mode, parts of
the original image are not copied.

❐

If you cannot correct the problem by taking the above actions, please contact your service representative.

Содержание Aficio Color 4006





































































































































































































































Результаты поиска

Содержание Aficio Color 4006

Отзывы:

Ricoh Aficio Color 4006, Руководство по эксплуатации, Страница: 148 / 228

Результаты поиска

Содержание Aficio Color 4006

Отзывы: