Ricoh Aficio CL4000DN, Руководство по установке

Страница: 73 / 88

IEEE 802.11b (Wireless LAN) Configuration
69
5
E
Press the
{U}
or
{T}
key to select
the transmission mode of IEEE
802.11b, and then press the
{
# En-
ter
}
key.
After the settings are made, about
two seconds later, the screen re-
turns to the IEEE 802.11b setting
menu.
Note
❒
The factory default is “802.11
Ad hoc”.
❒
To use an IEEE 802.11b card for
w h i c h t h e S S I D ( N e t w o r k
Name) setting is not necessary,
select “Ad hoc”.
❒
The transmission mode of IEEE
802.11b can also be set using a
Web browser. For details, see
Web browser, and “Configur-
i n g t h e N e t w o r k I n t e r f a c e
Board Using Web Browser”,
Software Guide.
F
If “802.11 Ad hoc” or “Ad hoc” is
selected for “Comm. Mode”, set
the channel to use for transmis-
sion.
Note
❒
Confirm the network adminis-
trator for the channel to use.
G
Press the
{U}
or
{T}
key to dis-
play “Channel”, and then press
the
{
# Enter
}
key.
The channel currently used ap-
pears on the display.
H
Press the
{U}
or
{T}
key to enter
the channel, and then press the
{
#
Enter
}
key.
I
Set “Trans. Speed” in the same
way.
Note
❒
The factory default is “Auto”. If
you need to change the trans-
mitting speed depending on en-
vironment you are using, select
the appropriate transmitting
speed.
J
If “Infrastructure” or “802.11 Ad
hoc” is selected for “Comm.
Mode”, set SSID to use for trans-
mission.
Note
❒
Confirm the network adminis-
trator for SSID to use.
❒
SSID can also be set using a Web
browser. For details, see the
Web Image Monitor Help, and
“Configuring the Network In-
t e r f a c e B o a r d U s i n g W e b
Browser”, Software Guide.
K
Press the
{U}
or
{T}
key to dis-
play “SSID”, and then press the
{
# Enter
}
key.
The following message appears on
the display.
If an SSID has been set, you can
check the set SSID. Press the
{
# En-
ter
}
key.
Comm. Mode:
*802.11 Ad hoc
Channel:
(1-13) 13
SSID:
View
GaiaP1GB_Setup-F4_FM_forPaper.book Page 69 Friday, June 3, 2005 7:50 AM