Ricoh Aficio AP400N, Инструкция к добавке

Страница: 8 / 38

UNIX Configuration
4
1
Using the Installation Shell Script
The installation shell script helps with the setup process. The installation shell
script automates some of the tasks in configuring /etc/hosts, /etc/printcap, and
in creating the spool directory for BSD UNIX, and in running the lpadmin com-
mand for System V UNIX.
Preparation
The installation shell script can be used on the following workstations: (it can-
not be used with other types of workstations.)
• SunOS 4.x.x, SunOS 5.x
• Solaris 2.x, Solaris 7, 8
• HP-UX 8.x, 9.x, 10.x, 11.x
• Redhat Linux 5.2, 6.x, 7.0, 7.1, 7.2
• OpenServer 5.06
• UnixWare 7.1.1
Depending on the security setting when installed, rsh/rcp/% telnet may not
be usable with RedHat 7.1 or later. Change the security level to the level that
allows use of rsh/rcp/% telnet. For more information about how to change
the setting, see the operating instructions for RedHat.
When you use NIS (Network Information Service) or DNS, you should con-
figure the server before running this installation shell script.
For more information about the configuration utility of your OS, see the man-
ual that came with the utility.