Ricoh Aficio AP400N, Инструкция к добавке

Страница: 10 / 38

UNIX Configuration
6
1
Executing the Installation Shell Script
After having configured the printer IP address, follow the procedure below to
execute the installation shell script and set up the workstation printing environ-
ment.
Preparation
Before executing the installation shell script, the IP address, the host name
and the printer name are required.
Following procedures use sample IP address: 192.168.15.16, sample host
name: nphost and sample printer name: np.
Note
❒
Use ftp to get the installation shell script from the printer.
AAAA
Log on to the workstation as root.
Note
❒
If you do not log on as root, the installation shell script will not run.
BBBB
Get the installation shell script from the printer.
A
Move to the directory you want to copy the installation shell script to.
B
Use ftp to connect to the printer with the IP address that you just config-
ured.
# ftp 192.168.15.16
Connected to 192.168.15.16
220 printer FTP server ready.
name (192.168.15.16:root:)
C
When a user name is requested, leave blank and press the
{{{{
RETURN
}}}}
(
{{{{
ENTER
}}}}
) key.
331 Password required for root.
Password:
D
When a password is requested, leave blank and press the
{{{{
RETURN
}}}}
(
{{{{
ENTER
}}}}
) key.
230 User root logged in.
ftp>
E
Type the following to get the installation shell script.
ftp> get install
F
Close the ftp session.
ftp> bye
221 Goodbye.
#