8.5 Printer Controller Disk Error Log (SP5990 to Print, SP5946
to Clear)
The Printer Controller Disk Error Log is used to determine whether a disk
error is fatal or not.
Use this for reference when deciding whether HDD replacement is needed.
To print to the printer controller disk error log:
1. Print the log data (SP5990-1/4).
Refer to the "SYSTEM PARAMETER AND DATA LIST" section for the
printing procedure.
2. Check the PRINTER DISK ERROR log section on the last page of the
printed System Parameter Report as shown in PRINTER DISK ERROR
below.
3. After printing this list, leave copy mode by touching the "SP Mode" button
on the display.
4. Touch the "Quit" button to leave SP mode.
PRINTER DISK ERROR
Reset Date..................DDMMYY
Total Counter ............. xxx
1st ...............................DDMMYY
2nd..............................DDMMYY
3rd...............................DDMMYY
4th...............................DDMMYY
5th...............................DDMMYY
This error log records the dates of the last five errors. If errors with the same
symptom occur frequently, change the hard disk.
The number of the total counter shows the total page number after the error
log was last reset.
SERVICE PROGRAM MODE TABLES
25 April 1997
36
