Ricoh Aficio 400 Скачать руководство пользователя страница 120

Страница: 120 / 170

CLEARING MISFEEDS

WARNING:

Since some parts of the copier are supplied with
high electrical voltage, touch only the parts specified
in the instructions on the sticker inside the ma-
chine’s cover.

WARNING:

When removing misfed paper from sections B and C,
use cautions. The fusing unit may be very hot. See
page 4 for the position of the fusing unit.

CAUTION: Do not leave any torn scraps within the machine.

NOTE: When clearing misfeeds, make sure that all units and levers are

returned to their original positions and all covers are closed.

NOTE: Do not touch originals in the optional document feeder when a pa-

per misfeed occurs in the copier. If you do, the copier cannot know
which originals have been copied, and which should be copied.

Check The Display

The display shows the location of mis-
fed paper. Remove them following in-
structions.

❐

P is indicated only when your ma-
chine is equipped with the optional
document feeder.

❐

R1 and R2 are indicated only when
your machine is equipped with the
optional finisher.

na-7

CLEARING MISFEEDS

122

Содержание Aficio 400











































































































































































Результаты поиска

Содержание Aficio 400

Отзывы:

Ricoh Aficio 400, Руководство пользователя, Страница: 120 / 170

Результаты поиска

Содержание Aficio 400

Отзывы: