Ricoh Aficio 400 Скачать руководство пользователя страница 118

Страница: 118 / 170

ADDING TONER

When "

Add Toner" is displayed on the display, it is time to supply toner.

WARNING:

Do not incinerate the used toner bottle. Toner bottle
might ignite when exposed to open flame.

WARNING:

Dispose of the used toner bottle according to your local
regulations.

NOTE: When adding toner, do not turn off the main switch. If you do, your

copy settings are cleared.

NOTE: Before setting the new toner bottle, shake it well at least 5 or 6

times.

NOTE: Do not remove the toner cap of the new toner bottle.

Open the front cover of the cop-
ier.

You can find the sticker (with

at the top) explaining how to add
toner, inside the front cover as
shown in the illustration.

Load the new toner bottle follow-
ing the instructions on the sticker.

na-7

ADDING TONER

120

Содержание Aficio 400











































































































































































Результаты поиска

Содержание Aficio 400

Отзывы:

Ricoh Aficio 400, Руководство пользователя, Страница: 118 / 170

Результаты поиска

Содержание Aficio 400

Отзывы: