Ricoh Aficio 3224C, Руководство по обслуживанию

Страница: 779 / 781

Aut
o
Re
vers
e
Docu
m
ent
Feede
r
B81
0
CONDITION OF JAM DETECTION
SM 23 B810
2.11 CONDITION OF JAM DETECTION
JAM 1A: If the registration sensor does not turn on within 114 mm x 2 since the
feed motor started (twice the distance between the original set position
and the (registration sensor).
JAM 1B: Duplex mode only: If the registration sensor does not turn on within 161
mm x 1.5 since the feed motor started (1.5 times the distance between
the original reverse position and the registration sensor).
JAM 2: If the registration sensor does not turn off within 1260 mm x 1.1 since the
feed motor started (1.1 times the distance between the paper stop
position at registration and the maximum original length).
JAM 3: If the original exit sensor does not turn on within 92 mm x 1.5 since the
feed motor started (1.5 times the distance between registration sensor
and exit sensor)
JAM 4: If the original exit sensor does not turn off within original 120
mm since the transport motor started after the exit sensor turns on
JAM 5:
Duplex mode only: If the original reverse sensor does not turn on within
161 mm x 1.4 since the feed motor started (1.4 times the distance
between the original reverse position and the registration sensor).
JAM 6: If the feeding original is removed.
JAM 7: If the cover is opened or the ADF is lifted while the ADF is in operation.
JAM 8: If an area outside the maximum scannable area is selected.
JAM 9: If scanning of the previous original is not completed when the registration
sensor detects the leading edge of the current original.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA