Ricoh Aficio 3224C, Руководство по обслуживанию

Страница: 638 / 781

ERROR CODES
B750 24 SM
Code Meaning Suggested Cause/Action
6-00 G3 ECM - T1 time out
during reception of facsimile
data
6-01 G3 ECM - no V.21 signal
was received
6-02 G3 ECM - EOR was
received
•
Try adjusting the rx cable equalizer.
• Replace the FCU or NCU.
6-04 G3 ECM - RTC not detected
•
Check the line connection.
•
Check connections from the NCU to the FCU.
• Check for a bad line or defective remote terminal.
•
Replace the FCU or NCU.
6-05 G3 ECM - facsimile data
frame not received within 18
s of CFR, but there was no
line fail •
Check the line connection.
• Check connections from the NCU to the FCU.
•
Check for a bad line or defective remote terminal.
• Replace the FCU or NCU.
•
Try adjusting the rx cable equalizer
Cross reference
•
Rx cable equalizer - G3 Switch 07 (PSTN)
6-06 G3 ECM - coding/decoding
error •
Defective FCU.
• The other terminal may be defective.
6-08 G3 ECM - PIP/PIN received
in reply to PPS.NULL
• The other end pressed Stop during
communication.
•
The other terminal may be defective.
6-09 G3 ECM - ERR received •
Check for a noisy line.
• Adjust the tx levels of the communicating
machines.
•
See code 6-05.
6-10 G3 ECM - error frames still
received at the other end
after all communication
attempts at 2400 bps •
Check for line noise.
•
Adjust the tx level (use NCU parameter 01 or the
dedicated tx parameter for that address).
•
Check the line connection.
• Defective remote terminal.
6-21 V.21 flag detected during
high speed modem
communication •
The other terminal may be defective or
incompatible.
6-22 The machine resets the
sequence because of an
abnormal handshake in the
V.34 control channel •
Check for line noise.
• If the same error occurs frequently, replace the
FCU.
•
Defective remote terminal.
6-99 V.21 signal not stopped
within 6 s •
Replace the FCU.
13-17 SIP user name registration
error •
Double registration of the SIP user name.
•
Capacity for user-name registration in the SIP
server is not sufficient.
13-18 SIP server access error •
Incorrect initial setting for the SIP server.
•
Defective SIP server.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA