Ricoh Aficio 180 Скачать руководство пользователя

Страница: 22 / 116

Panel Display

The panel display shows operational status, error messages, and function men-
us.

Important

❒

Do not apply a strong shock or force of about 30N (about 3kgf) or more to the
panel display. Otherwise, the display might be damaged.

Note

❒

When you select or specify an item on the panel display, it is highlighted like

❒

Keys appearing as

cannot be used.

❒

By default, the machine is in Copy mode when you switch on. This can be
changed. See “Settings You Can Change With The User Tools” of the System
Settings.

Displays and Key Operations

❖

Copy initial display

The machine status and messages

appear here.

Items which can be selected or

specified.

These four keys correspond to the

keys that are in the bottom line of
the display (e.g.

[Reduce]

[Enlarge]

and

[100%]

in the above display).

Press the relevant key to select a key
in the display.

Number of copies set.

Setting for this function.

Press these keys to select an item

on the display.

• To move the selection to the left, press

the

key.

• To move the selection to the right,

press the

key.

Auto

Содержание Aficio 180





















































































































Результаты поиска

Содержание Aficio 180

Отзывы:

Похожие инструкции для Aficio 180

Бренды по названию

Популярные бренды

Ricoh Aficio 180, Руководство по копированию

Результаты поиска

Содержание Aficio 180

Отзывы:

Похожие инструкции для Aficio 180

Бренды по названию

Популярные бренды