Ricoh AC205, Руководство по обслуживанию

Страница: 120 / 188

ERROR MESSAGES
B273 4-34 SM
Error Description Solution
Memory full The memory is full. Delete unnecessary
documents (delayed
transmission, broadcast,
polling etc.), or transmit the
documents again when
more memory becomes
available.
This can also occur when
sending a large, multiple
paged, complex document.
In this condition, split the
document into more than
one job.
No answer The remote fax machine does
not answer after several
attempts. Try again. Ensure the
receiving number is correct.
Number not assigned The speed dial location has no
number assigned to it. Dial the number manually
with the number keypad, or
assign the number.
Number not available An attempt has been made to
delay the number for a delayed
fax job. Check the number to be
deleted and try again.
Delete the number after the
delayed fax job has
finished.
No paper/Add paper There is no paper in the paper
tray unit. Load paper to the paper
tray unit.
Operation not assigned
An Add/Cancel operation is
being performed, but there are
no jobs waiting. Check the operation panel
to see if there are any jobs
waiting. The display shows
scheduled jobs in stand-by
mode, such as delayed fax.
[Paper jam0] Open/Close
door Paper is jammed in the feed area
of the paper tray. Clear the jam.
[Paper jam2] check inside Paper is jammed in the paper
exit area. Clear the jam.
Power failure The power has been turned off
then on, and the machine’s
memory was not saved. In this condition, the
memory has been lost. The
job must be restarted.
Registered The group dial location is already
registered with another speed
dial number. Select another group dial
location.
Retry redial The machine is waiting for a
specified time interval to pass
before it attempts to dial a
previously busy number again. Press <Select> to
immediately dial again, or
press <Cancel> to cancel
the redial operation.
Toner low The toner is almost empty. Remove the toner cartridge
and gently shake it. This will
improve image quality
temporarily.
Replace the toner cartridge
to ensure print quality.