Ricoh AC104, Сервисная документация

Страница: 106 / 160

ERROR MESSAGES
B173 4-40 SM
LINE ERROR
Description: The machine cannot connect with the remote machine, or has lost
contact because of a problem on the phone line.
Solution: Try again. Wait an hour for the line to clear. Then try again if you still have
problems.
LOAD DOCUMENT
Description: You have attempted to set up a sending operation with no document
loaded. Load a document and try again.
Solution: Try again. Make sure the remote machine is OK.
MEMORY FULL
Description: The memory has become full.
Solution: Either delete unnecessary documents, or retransmit after more memory
becomes available, or split the transmission into more than one operation.
NO ANSWER
Description: The remote machine did not answer after all the redial attempts.
Solution: Try again. Make sure the remote machine is OK.
NO CARTRIDGE
Description: When the machine detected the toner cartridge has not been installed.
Solution: Install the Cartridge.
NO. NOT ASSIGNED
Description: The speed dial location you tried to use has no number assigned to it.
Solution: Dial the number manually with the keypad, or assign the number.
NO PAPER [ADD PAPER]
Description: The recording paper has run out. The printer system stops.
Solution: Load the recording paper in the paper feeder.
OPEN HEAT ERROR
Description: Thermistor does not connected to main board or contact point is not
coupled tightly in power on.
Solution: Check thermistor contact point.
OVERHEAT
Description: The printer part has overheated.
Solution: The unit will automatically return to the standby mode when it cools down
to normal operating temperature.