Ricoh 4420NF, Руководство по эксплуатации

Страница: 47 / 116

Scan Settings
41
2
Limitation
❒
If the other party's machine does
not support the resolution at
which you are sending, this ma-
chine automatically switches to a
resolution which is supported.
This machine can send with
Stand-
ard , Detail , Super Fine and Extra
Super Fine . Even if you send the
original with Extra Super Fine , the
other party's machine may receive
it with
Fine (8x15.4 lines/mm, 200
x 4 0 0 d p i ) o r D e t a i l ( 8 x 7 . 7
lines/mm, 200 x 200 dpi).
❒
When copying or receiving with
Extra Super Fine , the optional
40MB memory card is required.
Turn on the ”Ex. Super Fine” with
the User Parameters (switch 20; bit
1,3). See p.140 “User Parameters”,
Advanced Features .
❒
When sending with Extra Super
Fine , turn on the ”Ex. Super Fine”
with the User Parameters (switch
20, bit 2). See p.140 “User Parame-
ters”,
Advanced Features .
Note
❒
This machine can receive fax mes-
sages with
Standard , Detail , Su-
per Fine
, and
Extra Super Fine
(optional).
❒
You can check the resolution type
with the Journal.
❒
When turning on the "Ex. Super
Fine" with the User Parameters
(switch 20; bit 2,3), sending or re-
ceiving faxes on multiple lines
may not be possible. Copies and
received documents may not be
printed either.
❒
300 x 300 dpi can be used with the
scanner function. When sending
fax messages with 300 x 300 dpi,
the machine switches to
Detail au-
tomatically.
❒
You can set the resolution type af-
ter the power is turned on or the
{{{{
Energy Saver/Clear Modes
}}}}
key is
pressed with the User Parameters
(switch 00; bit 5,4). See p.140 “User
Parameters”,
Advanced Features .
AAAA
Press the
{{{{
Resolution
}}}}
key to switch
between resolutions.
The indicators above the key show
the current selection.
Note
❒
When Detail and Super Fine
are lit at the same time, 300 x 300
dpi is selected.
Original Type
If your original contains photographs
or colored illustrations, select
Half-
tone to optimize image clarity.
When you select Color Scan , color
originals can be scanned with the
scanner function (optional). For de-
tails, see “Scanning a Color Original”
in the NIC FAX unit manual.
Note
❒
If you select Halftone , the trans-
mission will take longer than when
it is not selected.
❒
Color Scan cannot be selected with
fax transmission.
ZHMS190E
StellaF25_GB_Combine_F3_pre_FM_ZF.book Page 41 Monday, June 28, 2004 2:18 PM