Ricoh 4420NF Скачать руководство пользователя страница 104

Страница: 104 / 116

Troubleshooting

Indicators

Problem

Causes

Solutions

is lit red.

Paper has run out

Load paper.
See p.87 “Loading Paper in the Main
Paper Tray”.

is lit red.

Toner is exhausted

Replace the toner cartridge.

See p.88 “Replacing the Toner Car-
tridge”.

Note

❒

Even if there is no toner left, you
can still send fax messages.

is lit red.

Paper is jammed

Remove the jammed paper.

See p.93 “Clearing Original Jams”
and p.94 “Clearing a Copy, Fax, or
Print Jam”.

is lit red.

Cover is open

Close the cover.

The

Receive File

indicator

is lit.

You have received a mes-
sage into memory. (Substi-
tute Reception)

Print the message stored in memory
if it is not printed out automatically.

See p.69 “Substitute Reception”,

Ad-

vanced Features

StellaF25_GB_Combine_F3_pre_FM_ZF.book Page 98 Monday, June 28, 2004 2:18 PM

Содержание 4420NF





















































































































Результаты поиска

Содержание 4420NF

Отзывы:

Ricoh 4420NF, Руководство по эксплуатации, Страница: 104 / 116

Результаты поиска

Содержание 4420NF

Отзывы: