background image

 
Set both shutter speed and f-stop properly in the same manner as mentioned in "Using Flashcube". Any type of the  
flash bulbs has its own guide number and you have to divide the guide number by the distance from the camera to  
the subject in order to get the proper unstop value. When using the normal flash unit, set Shutter Speed Ring (D)  
at '"flash bulb picture".  If you are using the electronic flash unit, you can select any shutter speed ranging from 
1/30 -1/300 sec., and "flash bulb picture " (1/30 sec.).  
 Do not use flashcube and flash gun simultaneously.   

Unloading film

  

When the last picture has been taken, wind Film Wind Lever (M) until all of the paper backing is wound past Film 
Window (N), and take out the film cartridge for processing.  

Ricoh accessories

  

 

The following accessories are available for your Ricoh 126C Flex TLS Camera (Fig. 12):  
Tele Rikenon 100mm f2.8 telephoto lens  
Wide"       " 35 mm f2.8 wide-angle lens  
Ricoh 52mm screw-in filter, Y2, UV, 85A, Skylight  
Ricohlite V 5-successive shots flash unit  
Ricohtron II electronic flash unit  
Ricoh Self timer  

Camera TIPS and CARE......

  

* Read the instruction booklet carefully.  
* Before you go on a trip or photograph a special event, try a practice roll of film.  
* Keep fingers and neckstrap clear of lens.  
* Protect camera from dust, dirt and rough handling—do not expose camera to excessively high temperatures.  
* Do not attempt to repair your camera.  
  

Содержание 126C-FLEX TLS








Отзывы: