4. Remove the 12 black screws that secure each pedal
to the bottom cover.
5. Remove the 14 silver screws that support that
secure the cover in place. Do not forget the two screws
behind the carpet gripper.
6. Lift off the bottom cover to expose the internals. Take
pictures to assist in reassembly later.
7. Lift out the brake pedal and lay on its side with the
wiring at the top. Remove the screw securing the
black ground wire then carefully pull off the 3 plugs,
use needle nose pliers and be careful not to tear the
wires.
8. Remove the brake pedal assembly from the housing.
Using a 10mm wrench and a 5mm Allen Key, remove
the pivot from the base that secures the lower
telescoping spring housing.
