The initial position of the brake and clutch pedal can be adjusted by threading the master cylinder rod into or out of the clevis. First
loosen the jam nut and then rotate the master cylinder shaft. After you have reached the desired position tighten the jam nut to
prevent it from moving.
Step 3: Making the Connections
Plug the pedals into the PCU as follows:
Port A = Throttle
Port B = Brake
Port C = Clutch
Port D = Hand Brake (Optional)
Port E = (Spare for warranty purposes)
Windows will install its internal drivers. The pedals are powered from the USB port, no external power is required.
Step 4: Test Your Pedals to be Sure Windows has Installed Drivers Correctly
Windows XP, Vista, and 7: click Start, type:
joy.cpl
and ENTER
Windows 8: go to the Start screen, type:
joy.cpl
and ENTER
Windows 10: hit the
“
Windows
”
key, type:
joy.cpl
and ENTER
The Game Controllers panel will open and there should be a controller named GTpro Gen2, double click on it. A window with several
axis and buttons should appear. Press each pedal in sequence and verify the X, Y and Z axis respond. If they do then Windows has
properly installed the drivers and the data is getting to the PC. There are other axis and buttons displayed in this window. Those are
not used at this time but are there for future use.
If your Game Controllers panel opens but does not show any axis or buttons, please go to the next step. There is an unresolved bug
that may cause Windows to install an incorrect driver for the pedals. Your pedals will still function in the game. If you wish to resolve
the issue and are comfortable navigating through the windows registry, then please contact Ricmotech support and someone will
walk you through the steps to resolve this.
Open your favorite racing sim title and navigate to the controllers setup screen. Set the new axis for each pedal according to that
software’s procedure
. It is recommended to calibrate each pedal to its maximum and remove any linearity or other custom settings
in the sim. The pedal PCU will allow customizations to be done and will be retained in the pedal PCU memory. The settings in the
pedal PCU will work in every game. Setting custom settings in both the pedals and the game can yield undesired results.
Step 5: Programming and Calibration
Follow the instructions in the SmartPanel User Guide to make electronic adjustments to the pedals.
Содержание GTpro1
Страница 1: ...GTpro1 Gen2 Pedals Setup Guide ...
