COPYRIGHT RICHTECH 2020
- 8 -
3.2. Network Configuration (Please read carefully)
The default IP address of the V2 is
192.168.1.8.
You will need to
change your computer’s static IP address to be on the same network
segment as V2. You can change your IP address to 192.168.1.XXX (XXX here could be
from 2~254, but not 8 to avoid conflict with V2. So for example, 192.168.1.200 will
work).
Subnet mask: 255.255.255.0
Default gateway: Ask your network administrator for gateway IP. If you don’t know the
gateway IP address, leave it blank.
If you have trouble, you can refer to a video demonstration for setting up the network on
our website,
After that is complete, open Internet Explorer 10 or higher and put 192.168.1.8 in the
URL and hit enter. This will connect to the V2 management portal.
