Richmond KS10013 Скачать руководство пользователя страница 17

17 

D. Important Information

 

 
Please  read  these  instructions  carefully  before 
assembly and use. 
 

• 

Retain these instructions for future reference.

 

• 

For  outdoors  use  only 

  do  not  use  indoors.  Do 

not use below ground level.

 

• 

For use with LPG bottled gas only. A regulator of 
37mbar must be used for propane.

 

• 

Do  not  use  within  1m  of  any flammable  structure 
or surface.

 

• 

LP  gas  cylinders  should  not  be  placed  directly 
underneath the barbecue.

 

• 

LP gas cylinders must not be stored or used in the 
horizontal  position.  A  leak  would  be  very  serious 
and liquid could enter the gas line.

 

• 

When  igniting  barbecue  open  its  hood  before 
lighting.

 

• 

Do not move the barbecue while alight.

 

• 

This  barbecue  must  not  be  left  unattended  when 
lit.

 

• 

The hood handle can become very hot. Grip only 
the centre of the handle. Use of a cooking glove is 
advised.

 

• 

Use  caution  when  opening  the  hood,  as  hot 
steam inside is released upon opening.

 

• 

Parts  of  this  barbecue  become  very  hot 

  care 

must be taken when children, elderly people, and 
animals are present.

 

• 

Always turn off the gas bottle when the barbecue 
is not in use.

 

• 

Never  cover  a  barbecue  until  it  has  completely 
cooled. 

• 

Never use the barbecue with the side shelf in the 
down position. 

 

• 

Leak test annually, and whenever the gas bottle is 
removed or replaced.

 

• 

Do  not  store  flammable  materials  near  this 
barbecue.

 

• 

Do not use aerosols near this barbecue.

 

• 

Failure  to  follow  the  manual

s  instructions  could 

result in serious injury or damage.

 

• 

If  you  have  any  queries  regarding  these 
instructions, contact your local dealer.

 

 

E. Gas and Regulator 

 
This  barbecue  can  use  only  propane  LPG  bottled 
gas.  Propane  bottles  will  supply  gas  all  year  round, 
even on cold winter days. A spanner may be required 
to  change  gas  bottles.  The  bottle  should  never  be 
stood  on  the  trolley  base  and  placed  directly  under 
the barbecue. Gas bottles should never be stored or 
used  laid  on  their  side.  Never  store  gas  bottles 
indoors. 
 
 
 

YOU  MUST  HAVE  THE  PROPER  REGULATOR 
AND BOTTLE IN ORDER FOR THE BARBECUE TO 
OPERATE  SAFELY  AND  EFFICIENTLY.  USE  OF 
AN  INCORRECT  OR  FAULTY  REGULATOR  IS 
DANGEROUS 

AND  WILL  INVALIDATE  ANY 

WARRANTY.  Please  consult  your  local  gas  dealer 
for the most suitable gas bottles. 

 
 

F. Installation 

 
F1. Selecting a Location 

This barbecue is for outdoor use only and should be 
placed in a well-ventilated area. Take care to ensure 
that it is not placed UNDER any combustible surface. 
The  sides  of  the  barbecue  should  NEVER  be  closer 
than  1  metre  from  any  combustible  surface.  Keep 
this barbecue away from any flammable materials! 

 
F2. Precautions 

Do  not  obstruct  any  ventilation  openings  in  the 
barbecue body. Secure the gas bottle on the cylinder 
holder  and  always  tighten  it  with  the  black  strap 
provided. Should you need to change the gas bottle, 
confirm  that  the  barbecue  is  switched  off,  and  that 
there  are  no  sources  of  ignition  (cigarettes,  open 
flame,  sparks,  etc.)  near  before  proceeding.  Inspect 
the  gas  hose  to  ensure  it  is  free  of  any  twisting  or 
tension. The hose should hang freely with no bends, 
folds,  or  kinks  that  could  obstruct  free  flow  of  gas. 
Apart from  the  connection  point,  no  part  of  the  hose 
should touch any hot barbecue parts. Always inspect 
the  hose  for  cuts,  cracks,  or  excessive  wear  before 
use. If the hose is damaged, it must be replaced with 
hose suitable for use with LPG and meet the national 
standards  for  the  country  of  use.  The  length  of  the 
hose  shall  not  exceed  1.5m. 

N.B.-The  date  on  U.K.  

hose is the date of manufacture, not the expiry date. 

 
F3. Fixing the Regulator to the Gas Bottle 

Confirm  all  barbecue  control  knobs  are  in  the  off 
position.  Connect  the  regulator  to  the  gas  bottle 
according  to  your  regulator  and  bottle  dealer

instructions.

 

 
F4.  Leak  Testing    (To  be  performed  in  a  well-
ventilated area.) 

Confirm all control knobs are in the off position. Open 
the  gas  control  valve  on  the  bottle  or  regulator. 
Check  for  leaks  by  brushing  a  solution  of 

½

  water 

and 

½

  soap  over  all  gas  system  joints,  including  all 

valve  connections,  hose  connections  and  regulator 
connections. NEVER USE AN OPEN FLAME to test 
for leaks  at  anytime. If  bubbles form  over  any  of  the 
joints,  there  is  a  leak.  Turn  off  the  gas  supply  and 
retighten all joints. Repeat test. If bubbles form again, 
do  not  use  the  barbecue.  Please  contact  your  local 
dealer  for  assistance.  Leak  test  your  barbecue 
annually.  Check  the  hose  connections  are  tight  and 
leak  test  them  each  time  you  reconnect  the  gas 
bottle. 

PDF created with pdfFactory trial version 

www.pdffactory.com

Содержание KS10013





















Отзывы: