GTR206 Installation Manual:
Rev 1
3
1. Mount the GTR206 battery backup pack within 1.5m of your gate opener
2. Remove the plastic cover from the battery pack
3. Connect the red jumper wire to the negative and positive battery terminals as shown below:
Instructions for connecting the GTR206 to the circuit board of each
Richmond gate opener in the following pages
Installing the GTR206 Battery Backup Pack
4.
Refit the GTR206 cover
5. Now you can connect the pre-stripped
black and red wires to the circuit board
of your gate opener and connect to your
GTR206 battery backup pack using the
2-pin plug supplied
Please ensure the connecting nut
for the plugs is tightened
Pre-stripped black & red wires
