buttons (7, 6) of the remote control 1 until you hear the buzzer
sound and the backlight flashes, indicating that the remote control
1 is successfully paired; do not press any buttons on the remote
control 1, keep pressing the remote control The head down and
foot up buttons (7, 6) of the controller 2 until the buzzer sounds
and the backlight flashes, indicating that the remote controller 2 is
successfully paired. When the two remote controllers switch
control, you need to wait for the previous remote controller to
disconnect the Bluetooth connection. The latter can be controlled
by a remote control.
③
Dual control box to dual
remote control: Use the instructions of "single control box/single
remote control" to pair system 1. Use "single control box/single
remote control" to explain pairing system 2. Unplug the power of
System 1 and System 2. Use a synchronization cable to connect
the two systems. Power on system 1 and system 2. Now, the two
beds will operate in synchronous mode. Note: 1. After the control
box is powered on for 60 seconds, you can press the code
matching key to start the code matching, the buzzer will beep
three times to enter the code matching state, and the control box
code matching key has no reset function 2. The backlight goes out
after 10s of inactivity on the remote control, and it sleeps after 15s
and the Bluetooth is disconnected. Press the button again to
reconnect the Bluetooth. 3. When the control box is powered on
for the first time or accidentally cut off, please reset it before using
it. 4. Double control box to double remote control, press one
remote control switch when switching the remote control key
mode, you can change the key mode of the two remote control at
the same time. Continuous pressing mode does not follow the
synchronization
Содержание HJH55 Ble HANDSET
Страница 1: ...HANDSET HJH55 Ble...
