settings at the same time.
③
Press and hold
FLAT+flashlight for 3s at the same time, the backlight
flashes three times, the buttons on all positions of the
remote control enter the continuous pressing mode,
release the button and the motor stops.
3
FLAT one-key reset, all motors retract to the minimum
stroke position, turn off the bed light, massager (no
reset after power on)
4
The head motor extends.
5
The motor runs to the ZG position with one key (there is
an initial value). Multiplexing function: long press the
flashlight for about 5s, the backlight flashes, press ZG
within 2s, the buzzer will sound 3 times, and record the
current motor position, massager, and light bar status
to ZG. (Not cleared after power failure)
6
The foot motor extends.
7
Head motor retracted
8
The motor runs to the SNORE position with one key (with
initial value). When the one-key release mode is timed
for 15 minutes, it will be leveled and the massager will
be turned off. Press any key to exit the timing;
continuous pressing mode has no timing. Multiplexing
function: long press the flashlight for about 5s, the
backlight flashes, press SNORE within 2s, the buzzer will
sound 3 times, and record the current motor position,
massager, and light bar status to SNORE. (Not cleared
after power failure)
9
Foot motor retracted
10
The motor runs to the M1 position with one key (initial
value is 0). Multiplexing function: long press the
flashlight for about 5s, the backlight flashes, press M1
within 2s, the buzzer will sound 3 times, and record the
current motor position, massager, and light bar status
to M1. (Not cleared after power failure)
11
The motor runs to the TV position (with an initial value)
with one button. Multiplexing function: long press the
flashlight for about 5s, the backlight flashes, press TV
within 2s, the buzzer will sound 3 times, and record the
current motor position, massager, and light bar status
to the TV. (Not cleared after power failure)
12
The motor runs to the M2 position with one key (initial
value is 0). Multiplexing function: long press the
flashlight for about 5s, the backlight flashes, press M2
within 2s, the buzzer will sound 3 times, and record the
current motor position, massager, and light bar status
to M2. (Not cleared after power failure)
13
If the head massager is not turned on, press the button
to turn on the massager. The default strength of the
Содержание HJH55 Ble HANDSET
Страница 1: ...HANDSET HJH55 Ble...
