TheraTouch® CX2/CX4/EX4
35
NAVIGATION
ULTRASOUND THERAPY SET-UP — MANUAL OPERATION (CONT.)
To ensure effi
cient transfer of energy, a contact
medium is required between the ultrasound
applicator and the body. The best medium for the
transfer of ultrasound energy is a gel. Manufacturer
supplied conductive gel is recommended.
Start Therapy
•
Once your parameters and timer are set,
make contact with the treatment area.
Then start the therapy by touching the
output intensity on the bottom of the
screen. The color will change to orange.
•
Use the central control dial to adjust the
output level.
NOTE: The current intensity can only be
adjusted after the timer has been set.
The count-down starts when contact
is activated.
•
To pause the treatment, touch the
pause button
in the navigation bar.
•
To continue the treatment, touch
the run button
in the navigation bar.
•
To stop the treatment, touch the
STOP button
in the navigation bar.
NOTE: To restart after pressing stop, you will
need to re-enter the treatment time fi rst.
