Richman RM310 Скачать руководство пользователя страница 4

Страница: 4 / 32

RM310
3+1 burners gas grill

Grill Installation Codes

The installation must conform with local codes or, in the absence of local codes, with either the national

fuel gas code, ANSI Z 223.1/NFPA 54, Natural gas and propane installation code, CSA B149.1, or

propane storage and handling code, B149.2, or the standard for Recreational vehicles, ANSI A 119.2,

and CSA Z240 RV series recreational vehicle code, as applicable.

LP gas grill models are designed for use with a standard 20 lb. Liquid Propane Gas tank, not included

with grill. Never connect your gas grill to an LP gas tank that exceeds this capacity.

Warning

Liquid Propane Gas (LPG) grill models must be used with the liquid propane gas regulator

assembly supplied. Any attempt to convert the grill from one fuel type to another is extremely

hazardous and will void the warranty.

Grill shall be used only outdoors and shall not be used in a building, garage or any other enclosed area.

Never obstruct the flow of ventilation air around your gas grill cabinet.

Never disconnect the gas regulator assembly or any gas fitting while your grill is lit. A lit grill

can ignite leaking gas and cause a fire or explosion which could result in property damage, personal

injury or death.

Keep the gas regulator hose away from any heated surface and dripping grease. Avoid

unnecessary twisting of the hose. Visually inspect the hose prior to each use for cuts,

cracks, excessive wear, or other damage. If the hose appears damaged, do not use the gas

grill.

Call 1-866-898-8187 for a Richman replacement gas hose assembly

Warning

The gas hose should be inspected after each use-look for any cuts, cracks, excessive wear or other

damage. Let the hose be replaced every two years by a qualified technician or the retailer only.

Only use hose and regulators approved for LPG Gas.

Avoid twisting and bending of the gas hose.

Keep the gas hose or any other electrical cords away from hot surfaces of the grill.

The gas hose must comply with national regulations and should not be longer than 1.5 meters.

Содержание RM310

































Результаты поиска

Содержание RM310

Отзывы:

Бренды по названию

Популярные бренды

Richman RM310, Руководство по эксплуатации

Результаты поиска

Содержание RM310

Отзывы:

Бренды по названию

Популярные бренды