Richman RM310 Скачать руководство пользователя страница 22

Страница: 22 / 32

RM310
3+1 burners gas grill

Hand Tighten Only. Do Not Use A Wrench.

CAUTION: When the appliance is not in use the gas must be turned off at the tank.

Flow Limiting Valves on LP Gas Tanks

Your LP gas tank is equipped with a flow limiting valve that will restrict the flow of gas due to a sudden

change in pressure. This can often activate without your knowledge. You will notice among other things

that your grill does not get as hot as it should, will take longer to heat up, or you may not be able to

light all burners. If you notice any of the above, then you should reset the valve and clear your gas line.

To do this

1. Ensure the LP gas tank valve is OFF.

2. Disconnect the regulator from the LP gas tank.

3. Open all burner control knobs including the side burner to Hi/Light at the same time.

4. Close all burner control knobs to OFF.

5. Let the LP gas tank stand for at least 10 minutes.

6. Reconnect the regulator assembly to the LP gas tank.

7. Slowly, meaning about 1/4 turn at a time, turn on the LP gas valve.

8. Follow the burner lighting procedures to light the burner farthest away from the gas source.

9. The flow limiting valve should now be reset.

This flow limiting valve is triggered by sudden changes in pressure. This can be caused by a leak, faulty

connection of the regulator to the LP gas tank, turning on the LP gas tank valve too quickly, or turning

the burners off by turning the LP gas tank valve off before turning the burner control knobs to off. Note:

always turn off your burners using the burner control knobs first before turning the LP gas tank valve off.

Transportation and Storage

1. Place a dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type

of dust cap on the cylinder valve outlet that is provided with the cylinder of propane valve. Other types

of caps or plugs may result in leakage.

2. Always transport your cylinder in an upright position.

3. Do not smoke when transporting your cylinder.

Disconnecting A Liquid Propane Gas (LPG) Tank From Your Grill

Make sure the burner valves and LP gas tank valve are off. (Turn clockwise to close.)

Detach the hose and regulator assembly from the LP gas tank valve by turning the quick coupling nut

Содержание RM310

































Результаты поиска

Содержание RM310

Отзывы:

Бренды по названию

Популярные бренды

Richman RM310, Руководство по эксплуатации

Результаты поиска

Содержание RM310

Отзывы:

Бренды по названию

Популярные бренды