Richell 94951, Инструкция по эксплуатации

Страница: 1 / 16

1
Before assembling this product, make sure the following parts are included:
Thank you for choosing Richell's product. Please read this Instruction Manual carefully
before use, and use the product properly. Please also keep this manual intact and in a
convenient location for all to see and read. The figures used in this manual are to show
operation method or structure, and may look different from the actual product. If you give
this product to someone else, please also give this Instruction Manual to the new owner.
Instruction Manual
Bottom Outer Frame Bottom Outer Frame Bottom Outer Frame
Top Outer Frame Top Outer Frame Top Outer Frame Top Door Frame Top Door Frame Top Door Frame
Bottom Door Frame Bottom Door Frame Bottom Door Frame Bottom Door Slat
(8)
Bottom Door Slat
(8)
Bottom Door Slat
(8)
Top Door Slat
(8)
Top Door Slat
(8)
Top Door Slat
(8)
Locking Member Locking Member Locking Member
Plate Plate Plate Adjuster Knob
(8)
Adjuster Knob
(8)
Adjuster Knob
(8)
Adjuster Bolt
(4)
Adjuster Bolt
(4)
Adjuster Bolt
(4)
Nut
(16)
Nut
(16)
Nut
(16)
Bolt
(16
）
Bolt
(16
）
Bolt
(16
）
Screw
(2)
Screw
(2)
Screw
(2)
Bottom Extension
(4)
Bottom Extension
(4)
Bottom Extension
(4)
Top Extension
(4)
Top Extension
(4)
Top Extension
(4)
●
The door on this product will only swing one way and is designed to install in areas,
such as hallways, to keep cats (up to 11 lbs.) from escaping.
Please refer to Before Installation on page 6 for door opening directions.
●
The height of the product makes it harder for cats to jump over even with their strong feet.
●
This gate has no horizontal bars for cats to hook their feet.
●
Door feature allows users to pass through easily.
①
Openings with a height of 71.3" or more and width between 28.3" and 37.4". Extension set (sold separately) is available
to expand the Gate to 42.1".
②
The area for Door to swing on the side where cats are contained must be level with no step or slope.
※
As the product is a tension-mount gate, please choose a wood pillar or a studs of a wall. The installation surface must be
3.9" or more in width, straight, strong and flat.
※
Do not install the product in a location that does not have studs, such as veneer or drywall to prevent walls from being
damaged.
28.5" - 37.5"
71.5" or more
①
①
Wood Pillars
(3.9" or more in width)
Wood Pillars
(3.9" or more in width)
Wall with Studs Wall with Studs Wall without Studs Wall without Studs Baseboard Baseboard
※
Use blueprint, stud finder, or contact your builder to find location of Studs.
0.6" or less
in depth
0.6" or less
in depth
2.0" or more
in height
2.0" or more
in height
②
94951