MANUAL WATERING TURNING OFF THE SYSTEM
To water your yard manually, move the
“PROGRAM”
switch to “MAN” When watering is not in progress, you can prevent automatic watering
for the zone you wish to water. The timer will allow only one zone at a time by moving the
“DAY A”
and
“B”
switches to
“OFF”.
to be watered manually. If more than one program switch is placed in the
“MAN” position, only the lowest numbered zone will water. When the
switch is moved off the “MAN” position, the next lowest zone set on
“MAN” will start to water.
Manual watering is still possible, when the timer is in the
“OFF”
mode.
The “MAN” setting will override any automatic or semi-automatic
watering cycle, including any cycle in progress.
NOTE: When manual setting is used, water will stay on until the
switch is moved. DO NOT LEAVE IT IN THIS POSITION!
SEMI-AUTOMATIC WATERING
If no watering is in progress, press the
key to start a semi-
automatic watering cycle of all zones not set to
“OFF”.
To stop a semi-
automatic cycle, press
key and then within 10 seconds press
the
key. The watering in progress will stop, and the display will show
“OFF”
for 10 seconds before returning to the clock mode.
INTERRUPTING THE WATERING CYCLE
When an automatic or semi-automatic watering cycle is in progress
press
to freeze the cycle at that point of the zone’s run time. The
display will alternately flash “PAUSE” and the zone’s number and run
time. To resume the watering cycle, press
again, and the zone’s
count will continue.
NOTE: If a “PAUSE” is turned on and forgotten, the program will
automatically reset itself at midnight. The timer will then begin
with the first start time for the new day.
ELECTRONIC CIRCUIT BREAKER
If the timer detects a short circuit the shorted valve/zone will auto-
matically be turned off. The display will then alternately
and
the shorted zone number and run time. The timer will continue to auto-
matically water the other zones and the following watering cycles, with
the display continuing to flash on the zone number with the short
circuit.
After repairing the short, press
or any
key to return the timer
and display back to its current operating mode.
12 1 3