Rice Lake TuffSeal JB4EP, Руководство по установке

Страница: 8 / 16

4 TuffSeal Light to Mid-Range Junction Box
3.0 Junction Box Wiring
All TuffSeal junction box models have been designed to connect and trim up to four
load cells per board.
It is possible to use this box with other combinations. Use the expansion port on the
main board, to connect multiple junction boxes in series to accommodate applications
that have more than four load cells.
Figure 3-1. Expansion Port Wiring Location
1. Determine the wiring pattern to be used.
2. Route the load cell cables through the cord grips, do not tighten the grips.
3. Strip the wire insulation back 1/4'' to expose the wire.
4. Push in and hold the quick-connect lever with a small screwdriver.
5. Insert the appropriate wire into the exposed wire opening.
6. Release the screwdriver to allow the spring-loaded gate to close and lock the
wire in place.
The spring-loaded terminals will accommodate 12-28 gauge wire.
JP4
PT4 PT3
JP3
JP2 PT1
1
EXP
PT2 JP1
1
CELL4
1
CELL1
1
CELL3
1
CELL2
1
IND
-EX
-SI
SHD
+SI
+EX
M
-SI
S2C
+SI
+EX
-EX
-SI
SHD
+SI
+EX
-EX
-SI
SHD
+SI
+EX
+SI
-SI
-EX
SHD
-EX
SHD
+EX
+SE
-SE
1
EXP
1
IND
-SI
+SI
-EX
SHD
+EX
+SE
-SE
Note