Rice Lake RL150-10-5, Руководство по эксплуатации

Страница: 7 / 24

Assembly
© Rice Lake Weighing Systems ● All Rights Reserved 3
2.0 Assembly
2.1 Unpacking The Scale
Place the carton on a hard, level surface for unpacking. Preferably in the area where it will be used.
Carefully lift the scale out of the packaging material; lift it by the scale base.
The scale base and scale column are connected by cable and require great care when removing from the box so
that the cabling does not get damaged.
Parts contained in the shipping box include:
• Scale (the base and attached column)
• Height rod
• CD containing USB driver
• White box labeled Parts Inside which contains the following:
Wheels (2)
Wheel hinge (1)
Pan head screws (8)
AA batteries (6)
All component parts have been wrapped in plastic. Retain the packaging for use in the event that the scale must be returned for
modification, calibration or repair. It must be properly packed with sufficient packing materials.
Damage caused by improper packaging is not covered by the warranty.
2.2 Scale Assembly
Use the following steps to set up the scale.
A Phillips head screwdriver will be needed for installation.
1. Place the scale on a hard, level surface for the most accurate weighments.
2. Thread the excess cable through the lower column to eliminate possible pinching during installation.
Figure 2-1. Cabling Connecting the Scale Platform and Scale Column
3. Place the lower column on the base making sure not to pinch the cable.
IMPORTANT
IMPORTANT
Note