RL1200 Portable Beam Scale
10
Visit our website
6. Place the beam cap assembly over the weight rack (facing same direction as hook and steelyard hook) using acorn
bolts and washers and snug the beam cap assembly.
Figure 2-12. Attach Beam Cap Assembly
7. Attach the two loop clamps onto beam assembly.
Figure 2-13. Attach Loop Clamps to Beam Assembly
8. Take the beam assembly and put the upper end of the steelyard rod through the lower loop clamp on the beam and
hook the upper loop clamp to the hook on the weight rack (not shown).
Figure 2-14. Hook Loop Clamps to Beam Assembly and Weight Rack
Attach loop clamp (as
shown)
Second loop clamp
attaches here facing
upwards (also see
Hook the steelyard upper hook
through the lower loop clamp
as shown.
Hook the upper
loop clamp to
the weight rack
hook (not
shown)
