Rice Lake RL-22DT, Руководство по эксплуатации

Страница: 17 / 32

RL-22DT/RL-42DT Operation Manual - Accessories 13
3.2 Cutter Installation
The
RL-22DT/RL-42DT
printers feature a photo-eye, which detects gaps between labels. When a gap is detected,
the cutter will separate the label from the roll. To install the cutter, follow these instructions:
1. Make sure you have the cutter module
and two provided screws.
2. Power off the printer before installing the
cutter module.
Do not cut self-adhesive labels! The traces
of adhesive will pollute the rotary knife and
impair safe operation.
The service life of the cutter is 1,000,000
cuts for paper weights up to 120g/m
2
, and
500,000 cuts for paper weights 120g/m
2
to
170g/m
2
.
3. Place the printer on a horizontal surface
and open the top cover.
4. Remove the front cover piece.
You can use a coin or screwdriver to open
the front cover piece.
Note
2
1
Note