Rice Lake MSI Dyna-Clamp, Руководство по эксплуатации, Страница: 11 / 20

Configuration
© Rice Lake Weighing Systems ● All Rights Reserved 7
3.3 Function Keys
There are two function keys, and on the front panel of the Dyna-Clamp. The F-keys can be programmed to
several different functions.
To assign a function to an F-key:
1. Press and simultaneously to enter the setup menu.

displays.
2. Press to enter the setup of the F1 key.
3. Press to scroll through the available settings.
4. Press to select the desired setting and return to the setup menu.

displays.
5. Repeat Step 2 through Step 6 for the F2 key if needed.
6. Press to save.

displays briefly and the Dyna-Clamp returns to tension mode.
3.3.1 Off
When an F-Key is set to

, the F-Key is disabled.
3.3.2 Test
See Section 3.3 to set an F-Key as

. When an F-Key is set to

, pressing the F-Key prompts the display to scroll
through the following:
• Lights all LCD segments and the LEDs
•

followed by the version number
•

followed by the battery level in volts
•

followed by counting from

to

•

followed by the c-cal value displaying in the secondary display area
The test can be single stepped:
1. Press F-key set to

, then immediately press to stop the auto scroll.
2. Press to scroll through each step and press to view the step value.
3. Press to stop the test.
Internal tests are also performed and if the test fails, an error code displays ( Section 4.1.1 on page 12 ).
3.3.3 Unit
See Section 3.3 to set an F-Key as

. When an F-Key is set to

, pressing the F-Key scrolls through the available unit
options: lbf, kgf, and kN.
3.3.4 Scroll
See Section 3.3 to set an F-Key as

. When an F-Key is set to

, pressing the F-Key scrolls through the
available wire rope types and the average and peak values in the secondary (top) display area.
3.3.5 Active Function
See Section 3.3 to set an F-Key as

. When an F-Key is set to

, pressing the F-Key performs an action based
on the active function that is displayed in the secondary (top) display area. If the average function is displayed, then

adds an additional value to the average. If peak function is displayed, then

clears the current peak value.
F1 F2
F2
F1
F2
F1
F2
F2 F1
IMPORTANT