Rice Lake FlexWeigh System 101, Руководство по эксплуатации

Страница: 17 / 34

Setup Menu
© Rice Lake Weighing Systems ● All Rights Reserved 13
3.6 Modifying the Auto Tare
Use the following steps to modify the auto tare.
1. From the Main Setup Menu Screen ( Figure 3-7 on page 12 ), press the More=> softkey to access the second setup
menu screen.
Figure 3-8. Auto Tare Softkey
2. Press the Auto Tare Enabled or Auto Tare Disabled softkey which allows the operator to enable or disable the auto
tare feature. The system will toggle between the two modes of operation.
3.7 Modifying Auto Print
Use the following steps to modify the auto print.
1. From the Main Setup Menu Screen ( Figure 3-7 on page 12 ), press the More=> softkey to access the second setup
menu screen.
2. Press the Auto Print Enabled or Auto Print Disabled softkey. The system toggles between the two modes of operation.
Figure 3-9. Auto Print Disabled Softkey
3.8 Delay After Discharge
Use the following steps to modify the delay after discharge.
1. From the Main Setup Menu Screen ( Figure 3-7 on page 12 ), cycle through pressing the More => softkey to access
the third setup menu screen which includes the Delay After Discharge softkey.
Figure 3-10. Delay After Discharge Softkey Location
2. Press the Delay After Discharge softkey to access that softkey.
Figure 3-11. Enter Time
3. Enter in the time in seconds to delay after completion of a discharge before a new start input will be allowed.
Auto Tare
Enabled
Auto Print
Disabled
Delay After
Discharge
04/27/2011
02:15PM SCALE #1
Cancel Home
Delay After Discharge (sec):
=> .30
136.8
SCALE #1
Gross
Lb
SETUP MENU
End
SETUP MENU
Program: Express 101 (V 1.00)
ID #1 (disabled) Start O Zero Tol
ID #2 (disabled) Resume O Fill Copt
Dual Speed (enabled) Reset O Slow Fill
Auto Tare (enabled) Stop O Fast Fill
Auto Print (disabled)
Delay After Discharge (sec) :30