Introduction
1
About This Manual
This manual contains operating procedures for the DC-782 counting scale and provides the user with all the
information necessary for setup and operation. It is organized based on the procedures you will likely follow
when setting up and using your counting scale. This manual applies to Version 1.006 of the DC-782 counting
scale series.
Some procedures described in this manual require work inside the scale base. These procedures are to
be performed by qualified service personnel only.
Authorized distributors and their employees can view or download this manual from the
DIGI distributor site at
www.ricelake.com
.
1.0
Introduction
The DC-782 is a low cost counting scale that offers practical solutions for a full range of counting applications.
Its counting resolution of 1/500,000 gives you maximum counting precision and accuracy. Its backlit LCD
display enables operators to easily see weights and quantities. The DC-782 can also store an item code, tare
weight, unit weight, and setpoint value for 25 of your pieces, parts, or items and recall 10 of them with the
pressing of a single preprogrammed key. The RS-232 output allows you to transmit data from the scale to a PC.
When portability is required, choose the battery operation option of the DC-782 for over 300 hours of continuous
use in mobile workstations, outdoor applications, and rental fleets. The DC-782 is rugged enough to operate
reliably in many environments and withstand transport from one area of the plant to another or from one business
to the next.
1.1
Capacities and Resolutions
Table 1-1 lists the scale capacities, minimum graduations, and tare ranges for all models of the DC-782 counting
scales. The display resolution is 1/6,000 with an internal or counting resolution of 1/500,000.
1.2
Modes of Operation
The DC-782 has three modes of operation:
•
Weighing Mode –
where all weighing, counting and outputting of data operations take place.
•
Programming Mode –
where item data can be programmed into the memory of the scale. The display
will show
ProG
to indicate that you are the Programming Mode.
•
Maintenance Mode -
where your DIGI dealer can set specifications, perform scale calibration and
other maintenance functions.
#AUTION
Part No.
Capacity
108248
6 lb x 0.001 lb
108249
15 lb x 0.002 lb
108250
30 lb x 0.005 lb
108251
60 lb x 0.01 lb
Table 1-1. DC-782 Capacities and Resolutions
All manuals and user guides at all-guides.com
