LaserLight3 ConnexLink Wireless Radio Installation
2
Visit our website
Installation
IMPORTANT: Each ConnexLink radio is marked as Client or Server. Install the server type in indicators and the client type in
remote displays.
Figure 1. ConnexLink Type Information
1. To attach adhesive feet to ConnexLink, align adhesive standoffs with ConnexLink mounting holes then secure with
provided screws
Figure 2. Align and Attach Adhesive Standoffs to ConnexLink
2. Disconnect LaserLight3 power cable from power outlet.
3. Open the LaserLight3
enclosure.
IMPORTANT: The ConnexLink power cable has a black (negative) wire and a black with white segments (positive) wire.
Ensure power cables wires are connected to the power supply terminals with the same polarity.
4. Attach the black negative power wire’s spade to the free -V0 terminal on LaserLight3 power supply.
5. Attach the black and white positive power wire’s spade to the free +V0 terminal on LaserLight3 power supply.
Figure 3. Connect Power Cable Spade Connectors to LaserLight3 Power Supply
LaserLight3 Type or
Operating Mode
ConnexLink Type in
LaserLight3
Paired ConnexLink
LaserLight3 Indicator
Server
Client
LaserLight3 Remote
Display
Client
Server
Communication Type
Black Cable
Black and White Cable
